69, Jalan Ros Merah 2/2,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
MAG WING ARM GATE
| Previous | 2 / 3 | Next |
Download Files
MAG303_Installation_Guide.pdf (231.02 KB)MAG_spec_Wing303.pdf (204.7 KB)
BC_MAG_WING303.pdf (1 MB)
MAG Wing_303 arm gate system
Description:
MAG Wing 303 is an electro mechanical complete system for automatic arm gate system. it composed with primary of an electronic panel unit that control actuator motor to open or close the gate in swing motion.
Standard feature:
- Max gate weight per leaf is 400 kg
- Full DC operation to avoid any potential electric hazard
- Backup battery standby for power failure
- Actuator capability for 90?opening within only 8 to 10 second
- No underground installation
- Coded remote control allow 30 to 50 meter transmission
Technical specification:
| Description | Parameter |
|
Driving Method |
Electro mechanical screw driver piston type |
|
Operating voltage |
DC 18 V for normal Speed DC 12 V for ending speed |
|
Motor Output |
15 watt per arm |
|
Motor Amp. |
2.1 |
|
Piston Displace |
32 cm |
|
Piston Speed |
2.9 cm/sec |
|
Back-up battery |
12 volt. 7Ah rechargeable |
|
Safety Clutch |
Electric current sensing using H-Amp Auto Reverse |
|
Electric Controller |
Micro-processor based |
|
Temperature |
0 to 80˚C |
|
Gear Box |
Three stages planetary reducer |
|
Manual Operation |
Special released key during power failure |
| Max. Weight of gate | 400 kg per wing with force adjustable |
